Skip to main content

Bear Valley Springs Speed Limits

The image features a logo for Bear Valley Community Services District, showcasing bears and trees in a nature theme.

At the November 19 Public Safety Committee meeting, the committee held a lengthy discussion regarding speed limits in Bear Valley Springs. Recently, the CSD changed speed limit signage on many roads to reflect a limit of 35 mph. This was done in accordance with the California Vehicle Code (CVC) and a 1979 District ordinance. That ordinance established a prima facie (on its face, or "default") speed limit of 35 mph on District roads, except for the main arterial roads. Under the CVC, an engineering and traffic study is required to establish a speed limit lower than the prima facie limit.

In January 2026, the Board of Directors approved an engineering study that established lower speed limits on some District roads. However, the study covered only 16 road segments. Roads not included in that study remained subject to the 35 mph prima facie speed limit under previous CSD counsel’s interpretation of the 1979 ordinance.

As a result, signs displaying lower speed limits on those roads were not legally enforceable. The CSD replaced those signs with 35 mph speed limit signs.

However, following a legal review completed this week, current District counsel determined that the 1979 ordinance establishing the 35 mph speed limit was no longer valid. It expired after 14 years because no engineering study had been performed since its passage to support its continued use.

According to current legal counsel's interpretation of the California Vehicle Code, roads without an applicable engineering study or other legal basis for a lower speed limit are subject to a 55 mph speed limit. This was not a decision made by the CSD; it is the result of the legal requirements governing speed limits.

The CSD and Bear Valley Police Department agree that a 55 mph speed limit would be unsafe on the majority of our roads. The Public Safety Committee has recommended that the Board of Directors address this issue at its next meeting and consider two possible approaches:

  1. Expedite a new engineering study of District roads to establish appropriate speed limits in accordance with the CVC.
  2. Explore an administrative process that would allow the District to establish speed limits without requiring engineering studies.

The Board will discuss these options at its next regular meeting on Thursday, December 10.